Magnetic chucks are primarily designed for holding ferro-metallic work pieces. They consist of an accurately centered permanent magnet face. Fixed ferrous plates or pole pieces, contained within a housing are brought into contact with electromagnets or permanent magnets. These pole pieces are usually flush with the housing surface. The part or work piece to be held forms the closing of the magnetic loop or path, onto those fixed plates, providing a secure anchor for the work piece.
With fine parallel pole pitch P = 1+3 mm Pole pitch: steel 3 mm, brass 1 mm
Use:
Clamping of small and thin to medium-sized workpieces.
Features:
Extremely low height due to use of neodymium iron boron magnets.
Pole pitch P = 4.mm.
Nominal holding force: 80 N/cm2
Magnetic field height: 8 mm
Pole plate wearing limit: 5 mm
Pole pitch: steel 3 mm, brass 1 mm
| Dimensions(mm) | Weight in kg | |||||||
| Part No. | A | B | C | D | E | |||
| RMF125 | 125 | 55 | 100 | 114 | 4 x M6 | 4.5 | ||
| RMF160 | 160 | 55 | 125 | 140 | 4 x M8 | 7.5 | ||
| RMF200 | 200 | 55 | 160 | 180 | 4 x M8 | 12.0 | ||
| RMF250 | 250 | 55 | 200 | 224 | 4 x M10 | 18.0 | ||
| RMF300 | 300 | 55 | 250 | 280 | 4 x M10 | 29.0 | ||
| RMF350 | 350 | 55 | 280 | 310 | 4 x M10 | 33.0 | ||
| RMF400 | 400 | 55 | 315 | 355 | 4 x M10 | 47.0 | ||
