To accommodate workpiece geometry and allow 5-side machining
Made of cold-drawn steel
The pole raisers can be machined to any shape
The table shows an extract from our standard range
Can be supplied with specific machined dimensions, prepared for costumer’s workpiece dimension
Features
Fixed pole extension
Profiled shapes available
Workpiece pulled down by magnetic forces
Suitable for less evenness in a first set up
Flexible pole extension
Spring loaded in axial direction
For clamping of rugged workpieces with bended shapes
Suitable for high evenness in a first set up
Rigid, for fixed support. Mechanically flexible,for light components.
| Part No. | Dimension (mm) | |||
| a | b | c | d | |
| PE50FH | 50 | 48 | 60 | |
| PE50FL | 50 | 48 | 30 | |
| PE75FH | 75 | 70 | 60 | |
| PE75FL | 75 | 70 | 30 | |
| PE50EH | 50 | 48 | 60 | 7 |
| PE50EL | 50 | 48 | 30 | 3 |
| PE75EH | 75 | 70 | 60 | 7 |
| PE75EL | 75 | 70 | 30 | 3 |
