Use:
For workpieces that are difficult to clamp.
Features:
Extremely high holding force combined with slim
construction.
Laminations12mm steel / 3 mm brass
Nominal holding force: 120 N/cm2
Magnetic field height: 10 mm
Top plate wearing limit: 5 mm
Permanent magnetic chucks are manufactured from magnetized materials and exhibit a constant magnetic field without needing to introduce an electric current. Because these materials are highly magnetized materials, they do not lose their magnetic force. This also eliminates the need for electrical connections, switches, brushes, wires and auxiliary generators. The magnet is made of a special alloy and has high power and indefinite life. Most industrial permanent magnets sit within a carrier. Alignment of the poles determines the state of the magnet (whether it is on or off). In operation, these poles are physically moved to activate and de-activate the permanent magnet.
| Dimensions(mm) | Weight in kg | |||||||
| Part No. | A | B | C | D | E | pole pitch steel/
brass swteening p |
swteening
positions | |
| RMM100 | 100 | 56 | 70 | 2.5 | 3 x M5 | 12+3 | 1 | 3 |
| RMM130 | 130 | 56 | 90 | 2.5 | 4 x M6 | 12+3 | 1 | 5 |
| RMM160 | 160 | 56 | 125 | 3.0 | 4 x M8 | 12+3 | 1 | 8 |
| RMM200 | 200 | 56 | 150 | 4.5 | 4 x M8 | 12+3 | 1 | 13 |
| RMM250 | 250 | 56 | 200 | 4.5 | 4 x M8 | 12+3 | 1 | 20 |
| RMM300 | 320 | 56 | 250 | 4.5 | 4 x M8 | 12+3 | 1 | 29 |
| RMM350 | 350 | 56 | 300 | 4.5 | 4 x M8 | 12+3 | 1 | 40 |
| RMM400 | 400 | 56 | 300 | 5.0 | 6 x M10 | 12+3 | 1 | 59 |
| RMM450 | 450 | 56 | 350 | 5.0 | 6 x M10 | 12+3 | 2 | 70 |
| RMM500 | 500 | 56 | 400 | 5.0 | 6 x M10 | 12+3 | 2 | 90 |
